Dominator · 1LP-16-150 1LP-16-150-B 2LP-16-150 2LP-16-150-B 3LP-16-150 3LP-16-150-B
16 ft Light Pole · 150w
One, two or three 150 watt heads on a 16 ft pole.
That is the equipment at authorized dealer pricing. Shipping is not included. It ships by freight, and the cost depends on the state it is going to; the cart works it out before you pay. Installation is not included.
Ships in 3 to 5 business days from the day we place the order with Dominator, which is not the same as the day you ask for it. Treat that as a shipping estimate rather than a delivery date. Dominator tell us up front if anything is on backorder.
Curbside delivery. The freight carrier calls you to book a delivery time, usually on a weekday between 8 and 5, and someone needs to be there to sign. Check everything before you sign, and write any damage on the delivery receipt.
Why this one
One 150 watt head on a sixteen foot pole, lighting about thirty feet by thirty. That is a driveway hoop or one end of a small court, and it is where most people start. The pole is 6061-T6 aluminum with four inch sides and a hinge welded into the base, which matters more than it sounds: when a fixture eventually needs attention the pole lowers to the ground instead of needing a lift. The anchor is the same pivoting design as the hoops, so if a hoop is going in at the same time it is the same footing crew on the same day.
- 30 by 30 ft of light One 150 watt head, 19,500 lumens at 5500 kelvin.
- Hinged base The pole lowers to the ground for maintenance. No lift and no ladder.
- Same anchor as the hoops The pivoting anchor design is shared with the hoop line, so one footing detail covers both.
Two 150 watt heads on a thirty inch crossbar, covering about fifty feet by thirty. This is the pole that lights a half court properly rather than adequately, and the usual answer for a court that runs long: a pair of doubles down one side does more for even light than a single at each corner. Same sixteen foot hinged pole and the same pivoting anchor as the rest of the range.
- 50 by 30 ft of light Two 150 watt heads, 19,500 lumens each, on a 30 inch crossbar.
- Aim them separately Each head tilts on its own bracket, so the light goes where the court is.
- Hinged base The pole lowers to the ground for maintenance. No lift and no ladder.
Three 150 watt heads on a forty six inch crossbar, covering about sixty feet by forty. That is a full court from one pole, and it is the one that goes on the courts we light properly: two triples on the long side, or four around a full court, and there are no dark corners to play into. Same sixteen foot hinged pole underneath, and the same pivoting anchor as the hoops.
- 60 by 40 ft of light Three 150 watt heads, 19,500 lumens each, on a 46 inch crossbar.
- A full court from one pole The widest spread in the wired range, so fewer poles cover the same surface.
- Hinged base The pole lowers to the ground for maintenance. No lift and no ladder.
Specifications
- Coverage
- Illuminates a 30 ft × 30 ft area
- Fixture
- One 150w LED, 19,500 lm, 130 lm/w, 5500K
- Fixture size
- 21″ × 12″ × 3″
- Fixture finish
- Black anodized
- Pole
- 16 ft, 4″ square sides, 6061-T6 aluminum, 0.187″ wall
- Base
- Welded hinge, so the pole lowers to the ground for maintenance
- Slip fitting
- 2-3/8″ round, 2.625″ inner diameter
- Anchor
- Same pivoting anchor design as the hoops. Four galvanized J-bolts, hardware and a steel bolt template included
- Voltage
- AC100-277V, 50/60Hz
- Coverage
- Illuminates a 50 ft × 30 ft area
- Fixture
- Two 150w LED, 19,500 lm each, 5500K
- Fixture size
- 21″ × 12″ × 3″
- Fixture finish
- Black anodized
- Crossbar
- 30″
- Pole
- 16 ft, 4″ square sides, 6061-T6 aluminum, 0.187″ wall
- Base
- Welded hinge, so the pole lowers to the ground for maintenance
- Slip fitting
- 2-3/8″ round, 2.625″ inner diameter
- Anchor
- Same pivoting anchor design as the hoops. Four galvanized J-bolts, hardware and a steel bolt template included
- Voltage
- AC100-277V, 50/60Hz
- Coverage
- Illuminates a 60 ft × 40 ft area
- Fixture
- Three 150w LED, 19,500 lm each, 5500K
- Fixture size
- 21″ × 12″ × 3″
- Fixture finish
- Black anodized
- Crossbar
- 46″
- Pole
- 16 ft, 4″ square sides, 6061-T6 aluminum, 0.187″ wall
- Base
- Welded hinge, so the pole lowers to the ground for maintenance
- Slip fitting
- 2-3/8″ round, 2.625″ inner diameter
- Anchor
- Same pivoting anchor design as the hoops. Four galvanized J-bolts, hardware and a steel bolt template included
- Voltage
- AC100-277V, 50/60Hz
Specifications from Dominator's own documentation for this model. We are an authorized Dominator dealer.
Complete the setup



















